Data Sheet

PK-1000 User Manual
- 6 -
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
always
ON
ON:1
OFF:0
ADDR7
ON:1
OFF:0
ADDR6
ON:1
OFF:0
ADDR5
ON:1
OFF:0
ADDR4
ON:1
OFF:0
ADDR3
ON:1
OFF:0
ADDR2
ON:1
OFF:0
ADDR1
For example, if you want to set the address of an anchor to 3, it should be:
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
ON
OFF
OFF
OFF
OFF
OFF
ON
ON
2. Hardware module code upgrade
2.1 PK-1000 tag code upgrade
2.1.1 ISP upgrade
We recommend you to upgrade your code through ISP upgrade:
(1) Please make sure that BOOT0 of LocationMCU on tag board set as HIGH
voltage, and are connected to componentsListSerial and computer.
(2) PK-1000 tag is powered on, open FlyMcu.exe (free on internet, click on
“Language” on the menu bar, and choose “English”) and finish settings following
Figure 6.
Figure 6 FlyMcu.exe set up
（3）Click on “Start ISP(P)” to upgrade the code. Once succeed, the GUI of FlyMcu
looks like Figure 7.