Data Sheet

PK-1000 User Manual
- 8 -
Figure 8 Serial connection
(2) As illustrated in Figure 9, open RLKit, select correct serial port, and
click ”Open”.
Figure 9 connect host computer through serial port
3.1.2 TCP
(1) Powered up PK-1000. Select the correct WIFI ”BeiLa”. The password is
12345678.
Figure 10 Connect to BeiLa WIFI
(2) Once connected to WIFI, set the value of IP address and PORT name as
following figure, and then click on “Connect” button. When “Connect” changes into
“Disconnect”, the connection is done.
Figure 11 WIFI on host computer