Data Sheet

Air602_AT Instruction User Manual
3.10 Transparent transmission application in automatic working mode
（1） WPRT sets the wireless network card working mode to STA AT+WPRT=0
Luat 73 /73 page
（2） SSID Set the name of the AP you want to join, such as airm2m_wifi
AT+SSID=airm2m_wifi
（3） KEY Set the wireless key of the AP you want to join, for example 12345678
AT+KEY=1,0,12345678
（4） NIP Enable DHCP
AT+NIP=0
（5） ATM Set to automatic working mode
AT+ATM=0
（6） ATRM Set the socket connection in automatic working mode
AT+ATRM=0,0,192.168.1.100,1000
（7）
PMTF Save parameters to spi
AT+PMTF
（8） Z Reset the wireless network card to make the configuration take effect
AT+Z
After reset, the module automatically establishes a socket connection set by ATRM. If you use
the process interrupt chain, it will automatically reconnect.
flash