Data Sheet

Air602_AT Instruction User Manual
1 Introduction
1.1 Overview
This manual describes the AT+ command communication protocol of the Luat embedded Wi-Fi module. The
AT+ command protocol uses a set of command based on ascii to communicate with the Wi-Fi chip through the
UART interface.
1.2 Control Command Protocol
1.2.1 Command Code
This section is a user command for implementing parameter configuration and networking transmission of
the product. The command list is as follows:
Luat 6 /73
Number
Instruction
Name Function
1 (null)
Null Operation Instruction
2 ATM Set/query operating mode
3 ATRM
Set/query socket connection information automatically created in
automatic operating mode
4 BSSID Set/query the BSSID address of the specified AP
5 BRDSSID Enable and disable the SSID broadcast of the AP
6 CHL Set/query the specified wireless channel mode
7 CHLL Set/Query Wireless Channel List
8 CNTPARAM Query the configured networking parameters
9 CUSTDATA Receive user data sent via one-click configuration tool
10 DNAME Set/query device name
11 DNS Set domain name of network card