Data Sheet

Air602_AT Instruction User Manual
2.2.3.14 Close the specified socket ：AT+SKCLS
• Function：
Close the specified socket.
• Format（ASCII）：
AT+SKCLS=<socket><CR>
+OK<CR><LF><CR><LF>
• Parameter：
socket：socketnumber
• e.g.：
2.2.3.15 Set the socket sent by the system by default：AT+SKSDF
• Function：
Set the socket that the system sends by default. When the user needs to enter the transparent transmission
mode in the command mode, use this command to specify the destination for sending transparent data of the
serial port.
• Format（ASCII）：
AT+SKSDF=<socket><CR>
+OK<CR><LF><CR><LF>
• Parameter：
Luat 55 /73 page
→ AT+SKSTT=1
← +OK=1,2,"36.7.87.100",6100,59749,0
→ AT+SKCLS=1
← +OK