Data Sheet

Air602_AT Instruction User Manual
AT+WWPS=[!?][mode],[pin]<CR>
+OK[=mode],[pin]<CR><LF><CR><LF>
• Parameter：
mode： WPS function selection, empty parameters do not need to be filled out.
pin： PIN code of the wireless router
2.2.3.4
Join the specified AP
：AT+WJOIN
• Function：
Join/create the specified network depending on the type of network you have set up. If the current network type is
STA, this command functions to connect to the AP. If the current network type is SoftAP, this command functions to
create a SoftAP. If the current network type is Adhoc, this command function specifies the Adhoc network for the
connection, and can choose whether to automatically create the network if the network with the specified SSID is not
detected according to the setting parameters. If the current network is already connected or created, return the
network connection information directly. For ASCII format, the system returns a response message after the network
connection is successful.
• Format（ASCII）：
AT+WJOIN<CR>
+OK=<bssid>,<type>,<channel>,<encry>,<ssid>,<rssi><CR><LF><CR><LF>
• Parameter：
Bssid:Network BSSID,A hexadecimal number of length 12 in the format 001EE3A34455
type: Network Type
Luat 43 /73 page
mode pin Dscription
get_pin Get the pin code
set_pin Pin Code Set the pin code
start_pin Start networking
start_pbc Start networking