Data Sheet

Air602_AT Instruction User Manual
2.2.3 Network control class
2.2.3.1
NIC interface mode
:AT+PORTM
• Function： Set/query the interface mode of the Network Card.
• Format（ASCII）：
AT+PORTM=[!?][mode]<CR>
+OK[=mode]<CR><LF><CR><LF>
• Parameter：
mode： Interface mode
Value Dscription
0
Low speed UART
1
High speed UART
2 H-SPI
3 H-SDIO
• e.g.：
Query the NIC interface mode:
Luat 41 /73 page
0 BSSID is not enabled
1 Enable BSSID networking
Value Dscription
If the BSSID is enabled, it returns 1, bssid, key
If BSSID is not enabled ,returns 0, ssid, key