Data Sheet

Air602_AT Instruction User Manual
AT+PASS=[!?][pass] <CR>
+OK[=pass]<CR><LF><CR><LF>
• Parameter：
pass： 6 ASCII characters
2.2.2.24 Receiving user data ：AT+CUSTDATA
• Function：
Receive the user data sent by the one-click configuration tool. Send the AT+ONESHOT=1 command before use
to configure the module in one-button configuration mode.
• Format：
AT+CUSTDATA[=?]<CR>
+OK=data<CR><LF><CR><LF>
• Parameter：Null
2.2.2.25 Query the configured networking parameters ：AT+CNTPARAM
• Function： Query the configured networking parameters.
• Format（ASCII）：
AT+CNTPARAM[=?]<CR>
+OK=<bssid_en>,[bssid],[ssid],<key><CR><LF><CR><LF>
• Parameter： Null
返回值：bssid_en 值的含义
Luat
40 /73 page