Data Sheet

Air602_AT Instruction User Manual

• Parameter：

channel list：The list of wireless channels, in hexadecimal format, starting from the lowest bit, each bit

representing a channel, the default is 3fff, indicating 1~14 all channels

2.2.2.17 Enable automatic creation of adhoc network functions ：AT+WATC

• Function：

Set/Query whether to enable the automatic creation of the adhoc network function. This setting is valid only when the

wireless network type is set to adhoc, indicating whether an adhoc network with the same name is automatically

created when the network join fails.

• Format（ASCII）：

AT+WATC=[!?][enable]<CR>

+OK[=enable]<CR><LF><CR><LF>

• Parameter：

enable： Enable flag

Value

Dscription

Not enabled

Enable

2.2.2.18 Turn automatic energy saving mode on/off ：AT+WP

• Function：Turn automatic energy saving mode on/off

Luat 35 /73 page

Note:

This power-saving mode is the energy-saving mode of the wifi protocol. It only turns off the wireless transceiver

and reduces the CPU frequency. This mode CPU does not sleep, so it can receive AT/RI commands. After the

power-saving mode is turned on, the WiFi module enters the WiFi_off state after wireless idle. If there is no