Data Sheet

Air602_AT Instruction User Manual
Please refer to this part for specific applications. Create a SoftAP process
2.2.2.9 Wireless network security mode ：AT+ENCRY
• Function：
Set/query wireless network security mode. It is important to note that in addition to the OPEN mode, other
security modes need to be set with the correct network key in conjunction with the AT+KEY command. In
addition, in AP or AD-HOC mode, the module only supports setting OPEN, WEP64, and WEP128.
• Format（ASCII）：
AT+ENCRY=[!?][encry mode]<CR>
+OK[=encry mode]<CR><LF><CR><LF>
• Parameter：
encry mode : security mode
Value Dscription
0 OPEN
1 WEP64
2 WEP128
3 WPA-PSK(TKIP)
4 WPA-PSK(CCMP/AES)
5 WPA2-PSK(TKIP)
6 WPA2-PSK(CCMP/AES)
Luat 28 /73 page
→ AT+APSSID=!"AAAA-Test-Wifi"
← +OK