Data Sheet

Air602_AT Instruction User Manual
• E.g.：
2.2.1.7 Save in-memory parameters to FLASH ：AT+PMTF
• Function： Update all parameters saved in memory to FLASH
• Format（ASCII）：
AT+PMTF<CR>
+OK<CR><LF><CR><LF>
• Parameter：Null
• e.g.：
→
AT+WPRT=0
←
+OK
→
AT+SSID=TP-LINK_HyFi_1E
←
+OK
→
AT+KEY=1,0,""
←
+OK
→
AT+PMTF
← +OK
The AT+PMTF command is equivalent to saving the parameters of the above three commands to the
NV, so that these parameters do not need to be reset after the module is restarted or turned off. The
effect is equivalent to saving the parameters of each command separately (as shown below):
→
AT+WPRT=!0
Luat 18 /73 page
→ AT+RSTF
← +OK