Data Sheet

Air602_AT Instruction User Manual
Attention：
① In the Wi-Fi OFF energy saving mode, the setting is valid only when the network is disconnected, and the
wake_time parameter is meaningless.
② Standby and sleep power-saving modes will cause the network connection to be disconnected and the wake-up
will be reset.
③ Set WAKEUP pin wake mode, the wake_time parameter is meaningless.
• e.g.：
1. Wi-Fi OFF energy saving mode
Enter Wi-Fi OFF energy saving mode ：
AT+ENTS=0,1,1000,10000
Exit Wi-Fi OFF energy saving mode ：
AT+ENTS=0,0,100,1000
2. standy mode
Set timer wake-up mode, unit ms, (delay 1s, wake up after 10s)
AT+ENTS=1,1,1000,10000
Set WAKEUP pin wake up mode（wake_time parameter is meaningless ）
AT+ENTS=1,0,1000,10000
3. sleep mode
2.2.1.6 Reset Reset Factory Settings ：AT+RSTF
• Function： Restore the factory settings in FLASH; the restored settings will not take effect until the system is
restarted.
• Format（ASCII）：
AT+RSTF<CR>
+OK<CR><LF><CR><LF>
• Parameter：Null
Luat 17 /73 page
The same as standy mode