User Manual

RF Explorer User Manual page 35
50cm length - SMA male to SMA female RF pigtail Coaxial Cable RG316
RF cables are required when connecting RF Explorer to other
instruments or devices.
This 50cm cable is good for any frequency up to 3GHz, and can fit
RF Explorer with any external SMA-male device or antenna.
If you need extra length for your connection, you can easily daisy
chain two or more of these cables in series.
50cm length - SMA male to SMA male plug pigtail cable RG316
RF cables are required when connecting RF Explorer to other
instruments or devices.
This 50cm cable is good for any frequency up to 3GHz, and can fit RF
Explorer with any external SMA-female device or antenna.
SMA Termination – 50 ohm dummy load
Using SMA termination or Dummy Load is suggested for protection of the
SMA port of your RF Explorer when the device is exposed to unwanted high
radiation or strong electronic fields.
For instance, if you carry on your RF Explorer that is exposed to an X-Ray
scanner in the airport, you should remove the SMA antenna and plug a
protection 50 ohm SMA termination.