User Manual

RF Explorer User Manual page 13
 RF Connections enumerates the installed RF modules and how each one is connected to each SMA
RF port. This example below shows a standard 3G Combo with a 240-960MHz connection on the left
port, and 15-2700MHz on the right port. Click on any key to get out of this screen.
 About displays information about installed firmware and versioning. Use any key to get out of this
screen.
Note: if you enable this screen for more than 30 seconds while connected to USB port and power
switch in the unit set to ON, RF Explorer will automatically go to low power mode and will switch the
LCD off, but will keep charging the battery. This is suggested when you intent to charge the internal
battery but not make use of the unit for measurement.