Data Sheet

Connect To Local Server¶
Step 1. Power up and connect to putty¶
a) First, make sure the serial tool and RPi (RHF4T002 Adapter) are connected
correctly.
b) Plug FT232 tool to PC (If COM port is not recognized correctly, please refer
to Virtual COM Port Drivers
)
c) Open Device Manager of your PC to get the right COM port. Like COM15 for
example. Configure ExtraPuTTY according to below picture (Speed 115200, others
use defaults), click Open. As the gateway is still not opened, so there is nothing in
the terminal.
d) Power the gateway up. Booting log will be showed in the PuTTY terminal, in the
end it will prompt you to input your log in name. Please note it takes 1 or 2 minutes
to get the prompt information.