Data Sheet

Packaging and labeling VL53L0X
36/40 DocID029104 Rev 2
8.5 Handling and storage precautions
8.5.1 Shock precaution
Proximity sensor modules house numerous internal components that are susceptible to
shock damage. If a unit is subject to excessive shock, is dropped onto the floor, or a
tray/reel of units is dropped onto the floor, it must be rejected, even if no apparent damage is
visible.
8.5.2 Part handling
Handling must be done with non-marring ESD safe carbon, plastic, or Teflon tweezers.
Ranging module are susceptible to damage or contamination. A clean assembly process is
advised at customer after un-taping the parts, and until a protective cover glass is mounted.
8.5.3 Compression force
A maximum compressive load of 25N shall be applied on the module.
8.5.4 Moisture sensitivity level
Moisture sensitivity is level 3 (MSL) as described in IPC/JEDEC JSTD-020-C
8.6 Storage temperature conditions
Table 16. Recommended storage conditions
Parameter Min. Typ. Max. Unit
Temperature (storage) -40 +85 °C