Data Sheet

DocID029104 Rev 2 33/40
VL53L0X Packaging and labeling
37
8 Packaging and labeling
8.1 Product marking
A 2-line product marking is applied on the backside of the module (i.e. on the substrate).
The first line is the silicon product code, and the second line, the internal tracking code.
Figure 26. Example of marking
8.2 Inner box labeling
The labeling follows the ST standard packing acceptance specification.
The following information will be on the inner box label:
• assembly site
• sales type
• quantity
• trace code
• marking
• bulk ID number
8.3 Packing
At customer / subcontractor level, it is recommended to mount theVL53L0X in a clean
environment to avoid foreign material deposition.
To help avoid any foreign material contamination at phone assembly level the modules will
be shipped in a tape and reel format with a protective liner. The packaging will be vacuum-
sealed and include a desiccant.
The liner is compliant with reflow at 260°C. It must be removed during assembly of the
customer device, just before mounting the cover glass.