Data Sheet

9/24/2015 GroveSerialRFProWiki
http://www.seeedstudio.com/wiki/index.php?title=Twig__Serial_RF_Pro_v0.9b 6/6
1E
SetupUARTtransferspeed，
[parameter]4byte，[parameter]
unit:bps
Setuprange:1200-115200bps
Example:
ConfigInstruction:AAFA1E00002580,set
upspeedas9600bps.(0x00002580=9600)
Configinstruction:AAFA1E00009600,set
upspeedas38400bps.(0x00009600=38400)
4F4B0D0A（OK
/r/n)
87
Wirelesssignalstrengthwhen
receivingusefuldata,followsno
[parameter]
ConfigInstruction：AAFA87
RSSIvalueis8bit,
range:0-255
78
Disturbwirelesssignalstrength,
followsno[parameter]
Note：
Modulationindex:h=
Fd/Rb,Rangeis0.5~32.
Ifh>1,BW=Rb+2Fd;Ifh<1,
BW=2Rb+Fd.
ConfigInstruction：AAFA78
RSSIvalueis8bit,
range:0-255
VersionTracker
Revision Descriptions Release
v0.9b Initialpublicrelease date
Resources
SerialRFProDemoCode(http://www.seeedstudio.com/wiki/File:Serial_RF_Pro_Demo_Code.zip)
theHopeRFHM-TRPSeries100mWTransceivermodulesV1.0Datasheet(http://www.hoperf.com/upload/rf_app/hm-trp.pdf)
Support
Ifyouhavequestionsorotherbetterdesignideas,youcangotoourforum(http://www.seeedstudio.com/forum)orwish
(http://wish.seeedstudio.com)todiscuss.
Retrievedfrom"http://www.seeedstudio.com/wiki/index.php?title=Grove_-_Serial_RF_Pro&oldid=105269"
Categories:
433MHz Grove GroveUARTTwig Wireless ArduinoInstructions
Thispagewaslastmodifiedon17May2015,at14:13.
Thispagehasbeenaccessed33,312times.