Data Sheet

9/25/2015 GroveGesturev1.0Wiki
http://www.seeedstudio.com/wiki/Grove__Gesture_v1.0 3/10
2Built-inproximitydetection
3Variousmainboardssupport:ArduinoUNO/Seeeduino/ArduinoMega2560
Specification
Sensor PAJ7620U2
Powersupply 5V
Ambientlightimmunity <100kLux
GesturespeedinNormalMode 60°/sto600°/s
GesturespeedinGamingMode 60°/sto1200°/s
Interfacetype IICinterfaceupto400kbit/s
OperatingTemperature -40°Cto+85°C
Dimensions 20*20mm
Detectionrange 5-15mm
WithArduino/Seeeduino
SuggestReadingforStarter
DownloadArduinoandinstallArduinodriver
(http://www.seeedstudio.com/wiki/Download_Arduino_and_install_Arduino_driver)
GettingStartedwithSeeeduino/Arduino
(http://www.seeedstudio.com/wiki/Getting_Started_with_Seeeduino)
HardwareInstallation
Groveproductshaveaecosystemandallhaveasameconnectorwhichcanplugontothe
BaseShield(http://www.seeedstudio.com/wiki/index.php?title=Base_shield_v2&uselang=en)
.ConnectthismoduletotheI2CportofBaseShield,however,youcanalsoconnectGrove-
GesturetoArduinowithoutBaseShieldbyjumperwires.
ArduinoUNO BaseShield Grove-Gesture
5V
I2Cport
VCC
GND GND
SDA SDA
SCL SCL
Digit2 Notconnected INT(Reservedpad)
INT：Gesturedetectioninterruptflagmask.YoucanconnectINTpadtodigit2ofArduino
byusingjumperwire.