User Guide

IoT into the Wild
6
3. Quick Start
Refer to the following steps for quick configuration with SenseCAP server.
Step
Description
Section
1
Hook up the sensor probe
Section 4
2
Download SenseCAP Mate App
Section 6.1
3
Configure the LoRaWAN parameters
Section 6.3
4
Configure the sensor protocol
Section 6.4 for level / pulse
sensor
Section 6.5 for analog sensor
Section 6.6 for RS485 sensor
5
Join LoRaWAN network server
Section 7.2 or 7.3
6
Check the data from SenseCAP Dashboard or
App
Section 7.2.6
7
Deploying sensors
Section 12
3.1 Sensor Configuration Example
1) Configure a 0-2V voltage pH sensor: TBD
2) Configure a 4~20mA current sensor: TBD
3) Configure a level sensor: TBD
4) Configure a pulse sensor: TBD