User Guide

IoT into the Wild

Threshold mode

Wake up the data logger when the input signal is high or low and

upload the current level. If no, the data logger uploads data every

uplink interval.

For example, the upload interval is set to 60 minutes, and the

threshold mode is set to collect high level. When the input signal

changes from a low level to a high level, the Data Logger reports

the high level. If the threshold is not triggered, the current status is

uploaded every 60 minutes.

6.4.2 Set the pulse (counter) sensor

Select the “Counter Mode” as input type. Then set the following parameters in turn.