User Guide

IoT into the Wild

Press and hold for 3s

Activate Bluetooth again

1. Waiting for Bluetooth

connection: LED flashes

at 1s frequency

2. Enter configuration

mode after Bluetooth

connection is

successful: LED flashes

at 2s frequency

If Bluetooth is not

connected within 1 minute,

the device will reboot and

join LoRa network.

Press and hold for 9s

Power off

In the 3rd seconds will start

flashing at 1s frequency,

until the light is steady on,

release the button, the light

will go out.

Note:

1.After power off, you need to reconfigure the frequency band. Power off is recommended

when not deployed.

2. If the frequency is not configured after power on, the device will be power off again.