User Guide

IoT into the Wild
27
2) Select the Frequency Plan, if the gateway is US915, set the sensor to US915.
3) Click the “Send” button, send the setting to the sensor for it to take effect.
4) Click the “Home” button, the App will disconnect the Bluetooth connection.
Then, the sensor will reboot.
5) When the device is disconnected from Bluetooth, the LED lights up for 5 seconds and
then flashes as a breathing light.
6) After joining the network successfully, LED flashes fast for 2s.
6.2.6 Check Data on SenseCAP Portal
On the SenseCAP App or the website http://sensecap.seeed.cc/ , you can check the device
online status and the latest data. In the list for each Sensor, you can check its online status
and the time of its last data upload.