User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 9 of 45
Device Interface Introduction
A4: Antenna connector.
1 to 4: RS-485 channel ports for sensor (Channel Number: 1, 2, 3, 4 from left to right, up to down).
B5: Power switch and status indicator.
B6: two functions in one: (1) power supply port, (2) serial port.
Install the SIM card
⚫ Remove the six screws from the top cover with the Allen Hex Key (included in the package) and open the lid.
⚫ Swipe downward to open the SIM card socket, insert the Micro SIM card and swipe upward to lock the SIM
card socket. Make sure it is installed correctly and close the lid with the screws.