User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 6 of 45
2. Quick Deployment Guide
For quick deployment, here we are listing the main steps. Please refer to the following chapters for more details.
Connect Sensor Hub to SenseCAP Cloud Platform
1. Unpack, refer to the packing list and check whether there are missing parts.
2. Bind the device using the SenseCAP APP by scan the QR code on Sensor Hub.
3. Install the SIM card: Use the Allen Hex Key to open the cover of the device and insert the SIM card.
4. Install the antenna.
5. Connect the USB Serial Tool via port B6. Download SenseCAP Sensor Hub Configuration Tool.
6. Set the APN with SenseCAP Sensor Hub Configuration Tool.
7. Install the sensor (channel port 1 to 4).
8. Connect the power supply and plug in to the power port (B6).
9. Turn on the switch(B5): LED on represents normal start. The device initialization takes about 5 minutes.
10. View device status and sensor data on SenseCAP cloud platform.
11. Deploy the device.
1) Check and confirm the location for installing the device.
2) Install poles, brackets, and sensors, etc.