User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 43 of 45
Installation Guide – Sensor Hub Data Logger
（1） Install the aluminum pads on the back of the data collector.
（2） Install the hoops and mount the collector to the pole.
（3） When connecting the aviation connectors, align the widest groove on the male head to the position of the
flat head, insert and tighten.