User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 41 of 45
[MQTT] +QMTOPEN result: 0
[+QMTOPEN] elapse: 319 ms
[MQTT] +QMTCONN result: 0
elapse: 5s
>ST DOWNLINK CFG
[MQTTSubscribe] elapse: 304 ms
[MQTT] +QMTSUB msgid: 2, result: 0
Can't receive config message
[MQTTUnSubscribe] elapse: 184 ms
[MQTT] +QMTUNS msgid: 3, result: 0
elapse: 4s
>ST SEND ST
[MQTTPublish] elapse: 235 ms
[MQTT] +QMTPUB MsgId: 4, result: 0
send status successful
elapse:0s
>ST SEND CH
[MQTTPublish] elapse: 249 ms
[MQTT] +QMTPUB MsgId: 5, result: 0
send channel info successful
elapse:0s
>ST SEND DATA
RecordCount: 1
Read measuremnt data from local buffer, packet_size=43
CRC check sucess
[2021/03/08 09:05:54 T32]channel : 13, saddr: 128, meas id:5500, timestamp: 1615194354797, value: 24.89
[2021/03/08 09:05:54 T32]channel : 13, saddr: 128, meas id:5501, timestamp: 1615194354864, value: 0.00
[MQTTPublish] elapse: 260 ms
[MQTT] +QMTPUB MsgId: 6, result: 0
Publish, meas cnt = 2
Send measurement data successful // represents the successful sending of data to the server
elapse:1s
>ST LOG
[MQTTSubscribe] elapse: 139 ms
[MQTT] +QMTSUB msgid: 7, result: 0
[MQTTUnSubscribe] elapse: 178 ms
[MQTT] +QMTUNS msgid: 8, result: 0
elapse:5s
[MQTTDisconnect] elapse: 236 ms
[MQTT] +QMTDISC result: 0
>ST INFO OTA
This is the latest info, ver:2!
elapse:3s
>ST WORK LIST:
# meas_count:1, unsent:0
# cycle:300s, work:146s, sleep:154s
# net_reg:1, net_err:0, net_elapse:23s
# average_work_tm:146s
[2021/03/08 17:06:17]= === RUN END{1615194377}-0====