User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 34 of 45
Add Custom Measurement Types and Sensor Type IDs to
the SenseCAP Cloud Platform
The measurement value ID and the sensor type ID are defined in the Sensor Hub Configuration Tool above. The
cloud platform supports adding measurement type and sensor type ID for user’s convenient management.
5.3.1 Add a Measurement Type
（1） Once you're on the cloud platform, click "Custom Type" in the left function bar, and then click
"Measurement".
（2） In the case of soil temperature, for example, the soil temperature measurement ID is 5500, unit: °C