User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 27 of 45
（2） Click on "+", to add a new sensor
（3） Configure the sensor’s basic information:
① Modbus Address: you can define the sensor’s address in the range of [128, 254]. The chosen
soil temperature and moisture sensor has been configured as 128, so enter 128 here.
② Power Voltage: Sensor Hub supports 12V and 5V power supply. The chosen soil temperature
and moisture supports 5V power supply, so select 5V here.
③ Power Time:
Periodic: When Sensor Hub enters “Periodic” mode, the sensor’s power supply is cut-off, and