User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 19 of 45
（1） Select the cloud platform: Click to enter commands directly at the green cursor below the main interface.
Enter the lowercase letter: b
Tip Input: 1 is the SenseCAP cloud platform (default);
2 is the user's third-party MQTT server;
3 is a SenseCAP private deployment;
To configure the user's own server, please enter the command 2 and press Enter.