User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 18 of 45
Data Interval: The interval between each data upload, with a minimum of 5 minutes. After modification,
you need to click "Write" to take effect.
Battery: The remaining power of the built-in lithium battery.
(Change to upload data every 10 minutes)
4.4.2 MQTT Server Configuration
When you access the General Settings, some commands are shown at the right window of the main interface.