User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 17 of 45
(4) Click "General Settings" and the configuration interface will pop up.
4.4.1 Device EUI and Data Upload Interval Modifications
① Device EUI: The device's unique number, corresponding to the device label, is 16 bits long.
② Card ICCID: SIM card ICCID (readable only in working mode).
Signal RSSI: Cellular (readable only in working mode).