User Manual
Table Of Contents
- 1. Product Introduction
- 2. Quick Deployment Guide
- 3. Assemble the Device
- 4. Configure the Device to Connect to SenseCAP Cloud Platform
- 5. Add a Custom Sensor
- 6. Troubleshooting and Log Analysis
- 7. Do’s & Don’ts
User Manual
© 2008-2021 Seeed Technology Co., Ltd. All rights reserved. solution.seeedstudio.com
Page 11 of 45
Configure APN
Please refer to section 4.
Connect the Power Cord
Unscrew the protective cover of the power supply connector, plug one end of the power extension cord into the
power connector and tighten it, plug the other end of the power extension cord directly into the power adapter.