User Manual

SARK-110-ULM User’s Manual
Rev 1.0 June 22
th
, 2019 - 62 - © 2019, Melchor Varela – EA4FRB
Enter an optional name for the profile
Display shows the calibration parameters.
Press the Enter [ ] button to continue.
Connect the open load.
Load status is indicated by the status of the
|Rh| indicator. If shown in reverse mode
denotes incorrect load.
Press the Enter [ ] button to continue, or
[ ] to exit.
The calibration progress will be shown in
the display bar.
Connect the short-circuit load.
Load status is indicated by the status of the
|Rh| indicator. If shown in reverse mode
denotes incorrect load.
Press the Enter [ ] button to continue, or
[ ] to exit.