User Manual

SARK-110-ULM User’s Manual

Rev 1.0 June 22

end of the test port extension cable being employed. Please refer to Appendix D: on how to carry

out the steps for OSL calibration.

The measurement results can be saved in a file in tabular format.

The Circuit Models function is only available in the Single Frequency, SWR or Multiband modes.

Press the Menu [ ] button, select «Model» and then the desired function in the pop-up

submenu.

4.2.1 Loop Antenna/Coil

This function determines the equivalent circuit model of small loop antennas or coils. This

function is specially tailored for the measurement of antennas for HF RFID applications. Detailed

usage of this function is described in the Application Note available at:

http://www.sark110.com/application-notes/rfid-appnote

The measurement procedure is as follows:

Select the file name to store the data.

Press the Return [ ] button if not

needed to save the data.