User Manual

SARK-110-ULM User’s Manual

Rev 1.0 June 22

condition the power consumption is reduced, so using single-shot mode helps to increase the

battery autonomy.

«Setup - Scale»

The SARK-110-ULM provides three pre-defined scale values: Normal, High and Low as well as

Auto (automatic scaling). This setting defines the maximum and minimum values for each

parameter on the Y axis, see Appendix H:. This setup is valid for the Scalar Chart mode.

«Setup - Z0»

This setup permits the reference characteristic impedance to be changed. The value can be

selected from a set of predetermined values or it can be user-specified selecting the Custom

option.

«Setup - APO»