User Manual

SARK-110-ULM User’s Manual
Rev 1.0 June 22
th
, 2019 - 21 - © 2019, Melchor Varela – EA4FRB
«Setup - Calibration»
The calibration features are accessible through the Calibration submenu:
«Setup – Calibration - OSL»
See Appendix D:
«Setup – Calibration - Frequency»
See Appendix E:
«Setup – Detector»
See Appendix F:
«Setup – Calibration - Profile»
See Appendix D:
«Setup – Run Mode»
The Run Mode setup menu option allows setting «Continuous» or «Single Shot» sweep modes.
In continuous mode the analyzer is constantly sweeping provided that it is not in paused state,
controlled by the Run/Hold [ ] button. In single-shot mode the sweep automatically stops on
completion. Press the Run/Hold [ ] button to start a new sweep. Notice that in the stop