User Manual

SARK-110-ULM User’s Manual

Rev 1.0 June 22

Specify an optional delay for the

automatic start of the measurements

(self-timer function).

When a Delay is specified, a countdown

will commence.

Otherwise, press the Enter [ ] button

button to continue.

After completing the sweep scan, the

analyzer will save the results of the sweep

scan to the file.

Notice that the scan time is much longer

than usual due to the higher accuracy

setting and the additional number of

points.

Press the appropriate button to continue.

2.9 Changing the Settings

Press the Setup [ ] button to get into the Setup menu. Select the needed setup option using the

up or down arrow buttons and then press the Enter [ ] button to validate or the Return [ ]

button to cancel.