Datasheet

Module Pin Name Module Pin # Usage and Description Type/Dir

USB0_D_N

USB0_D_P

115

117

VUSB Supply

USB 2.0#0 Data

Unused

Ground

Power

Bidir

Unused

Ground

The carrier board supports two USB Connectors. One is a USB 2.0 Micro B connector

supporting Device mode only (including USB Recovery). There are two, dual stacked USB

3.0 Type A connectors. Each connector supports Host mode only. A single load switch

supplies VBUS to all four USB 3.0 ports and is limited to 2A of output current.

Note:

In the Type/Dir column, Output I s to USB connector. Input is form USB connector.

Bidir is for bidirectional signals.

USB 2.0 Micro B Connector Pin Description:

Pin #

USB Port