Datasheet

Camera 0 Connector Pin Description:
Camera Connector
Pin # Module Pin Name Module Pin # Usage/Description Type/Dir Default
1 – – Ground Ground
3 CSI0_D0_N 4
CSI 0 Data 0 Input
5 CSI0_D0_P 6
7 – – Ground Ground
9 CSI0_D1_N 16
CSI 0 Data 1 Input
11 CSI0_D1_P 18
13 – – Ground Ground
15 CSI0_CLK_N 10
CSI 0 Clock Input
17 CSI0_CLK_P 12
19 – – Ground Ground
21 CAM0_PWDN 114 Camera #0 Power-down Output, 1.8V
23 CAM0_MCLK 116 Camera #0 Master Clock Output, 1.8V
25 CAM_I2C_SCL 213
Camera I2C. 2.2kΩ pull-ups on module
. 1.6kΩ
pull-ups on the carrier board. The
module CAM_I2C pins connect to an I2C mux.
The camera connector #1 receives the I2C from t
he mux (1 output). The I2C signals on
the camera side of the mux have 47kΩ pull-ups.
Output, 3.3V
27 CAM_I2C_SDA 215 Bidir, 3.3V
29 – – +3.3V Power
st
2
– – Not Used –
4
6
8
10
12
14
16
18
20
22
24
26
28
30
Note:
IntheType/Dircolumn,Outputistocameramodule.Inputisfromcameramodule.
Bidirisforbidirectionalsignals.
16