Datasheet

The carrier board supports several USB Connectors. One is a USB 2.0 Type C connector
supporting Device mode only (including USB Recovery). There are two, dual stacked
USB 3.0 Type A connectors. Each connector supports Host mode only. A single load
switch supplies VBUS to all four USB 3.0 ports and is limited to 2A of output current.
USB 2.0 Type C data only - J1
USB Port
6
Note:
IntheType/Dircolumn,OutputIstoUSBconnector.InputisformUSBconnector.Bidirisforbidirectionalsignals.
Pin# ModulePinName ModulePin# Net Name Usage/Description Type/DirDefault
A4/B9
A9/B4
A5
B5
A7
B7
A6
B6
A8
B8
A1/B12
A12/B1
GPIO00
(USB_VBUS_EN0)
87 USB0_VBUS_DET* VBUSSupply Power
– – DAT_CC1 – –
– – DAT_CC2 – –
USB0_D_N 109 Type C_USB_DN
USB 2.0 #0 Data Bidir
USB0_D_P 111 Type C_USB_DP
– – – – –
– – – – –
– – –
Ground
Ground
– – – Ground