Datasheet

The carrier board supports Five Connectors. One is a USB 2.0 Type C connector for Power
In, another one is a USB 2.0 Type C connector supports Device mode only (including
USB Recovery). There are also one dual stacked USB 2.0 Type A connectors and one USB
3.0 Type A connectors which supports Host mode only. A single load switch supplies
VBUS to all USB Type A ports and is limited to 2A of output current.
USB 2.0 Type C power in only - J1:
USB Port
6
Pin# ModulePinName ModulePin# Net Name Usage/Description Type/DirDefault
A4/B9
A9/B4
A5
B5
A7
B7
A6
B6
A8
B8
A1/B12
A12/B1
– – –
VBUSSupply
Power
– – – Power
– – PWR_CC1 – –
– – PWR_CC2 – –
– –
USB 2.0_DN Test Point Only
–
– – –
– –
USB 2.0_DP Test Point Only
–
– – –
– – – – –
– – – – –
– – –
Ground
Ground
– – – Ground