Datasheet

Note:
IntheType/Dircolumn,Outputistoautomationheader.Inputisfromautomationheader.Bidirisforbidirectionalsignals.
Button Header - J14
16
ConnectPin5andPin6todisable
Auto-Power-Onandrequirepower
automationpress.
Connects to LED Cathode to
indicate SystemSleep/Wake
(Offwhensysteminsleepmode)
ConnectPin9andPin10during
power-ontoputsysteminUSBForce
Recoverymode.
Pin# ModulePinName ModulePin# SignalName Usage/Description Type/DirDefault
1
2
3
4
5
6
7
8
9
10
11
12
- - PC_LED- Input
- - PC_LED+ ConnectstoLEDAnode(seePin1) Output
UART2_RXD(DEBUG) UART2_RXD_LS UART#2Receive Input
UART1_TXD(DEBUG) UART2_TXD_LS UART#2Transmit Output
– BMCU_ACOK Input
– LEDAUTO_ON_DIS
Auto Power-on disable: Pulled to
GND. See Pin 5.
na
– GND Ground Ground
SYS_RESET 239 SYS_RST*
Temporarilyconnect
Pin7andPin
8toresetsystem
Input
– GND Ground Ground
FORCE_RECOVERY 214 FORCE_RECOVERY* Input
– GND Ground Ground
SLEEP/WAKE 240 PWR_BTN*
Connect Pin11andPin12toinitiate
power-onifAuto-Power-On
disabled (Pin 5 and Pin
6connected).
Input