Datasheet

The carrier board supports two USB Connectors. One is a USB 2.0 Micro B connector
supporting Device mode only (including USB Recovery). There are two, dual stacked
USB 3.0 Type A connectors. Each connector supports Host mode only. A single load
switch supplies VBUS to all four USB 3.0 ports and is limited to 2A of output current.
USB 2.0 Micro B Connector Pin Description:
USB Port
Note:
IntheType/Dircolumn,OutputistoUSBconnector.InputisformUSB connector.Bidir
isforbidirectionalsignals.
6
滚滚长江东逝水
Pin# ModulePinName UsageandDescription Type/Dir
1
2
3
4
5
– VBUSSupply Power
USB0_D_N
USB2.0#0Data Bidir
USB0_D_P
– Unused Unused
– Ground Ground