Datasheet

Mini Vibration Motor

Operating conditions

Items Specifications Condition & Remarks

Rated voltage 3.0V DC

Rated load Counter weight As specified in the outline drawing.

Rotation C.W. (clockwise)

Motor position All positions

Operating voltage 2.2~3.6V DC

Operating conditions -30 ~ 70℃ ordinary humidity No condensation of moisture.

Storage conditions -40 ~ 80℃, ordinary humidity No condensation of moisture.

Mechanical specifications

Items Specifications Condition & Remarks

Configuration As specified in outline drawing

Appearance There shall be no evidence of mechanical damage and

shall not have inadequate corrosion, etc.

Visual examination: Inspection

carried out on samples.

Shaft end play 0.05 mm ~ 0.2 mm Max

Mass

1.23g approx.

Holding strength of

vibration weight

49N (5kgf)

Page 3 of 13 11/7/2009

PAGE 1
Mini Vibration Motor Operating conditions Items Specifications Condition & Remarks Rated voltage 3.0V DC Rated load Rotation Counter weight C.W. (clockwise) Motor position All positions Operating voltage 2.2~3.6V DC Operating conditions -30 ~ 70℃ ordinary humidity No condensation of moisture. Storage conditions -40 ~ 80℃, ordinary humidity No condensation of moisture. As specified in the outline drawing.
PAGE 2
Performance and characteristics Items Specifications Condition & Remarks Rated speed 12,000 @ 2,500 rpm At rated voltage and rated load (vibration weight). Rated current 90mA max Stall current 120mA max At rated voltage. Starting voltage 2.0V DC max At rated load (vibration weight) any position of rotor. Insulation resistance 1MΩ min At DC 100V between the lead wires and motor body. Terminal resistance 2Ω approx.
PAGE 3
8-2 Destructive atmospheres: Do not use and store the motor in the corrosive gas atmosphere (H2S, SO2, NO2, Cl2, etc.), or substances that can emit toxic gases, such as organic silicon, cyanide, formalin, or phenol compounds. The motor may get serious damages. 8-3 Condensation: Condensation on the electrical circuits can destroy the motor or control circuits. Monitor the environment and undertake measures to prevent condensation, such as installing condensation sensors to cut power when necessary.