Datasheet

RB-See-213

SeeedStudio USB Charger and Power Booster LiPo Rider Pro

Power your favourite electronic kit with green energy! The LiPo Rider Pro is a promotion of Lipo Rider.It

supply heavier load output(1A peak) than Lipo Rider. The LiPo Rider Pro board allows you ride the solar

wave to run your favourite 5V device. The LiPo Rider Pro board is the ideal green power solution for

your outdoor sensor design. Attach the LiPo Rider Pro board to your sensor board and it can run on solar

power forever! It can also be used to charge mobile phone.

The LiPo Rider Pro is extremely affordable and easy to use. No programming is required. Plug it in and it

works. The internal charger IC handles all the power flow between the various components.

In case solar power is not sufficient, the microUSB port allows you to charge your lithium battery

through USB. It can also be used to program your kit without detaching the LiPo Rider Pro board.

The LiPo Rider Pro can be purchased as a separate board or as a kit (LiPo Rider Pro + Lithium Battery +

Solar Panel) from Seeed Studio.

PAGE 1
RB-See-213 SeeedStudio USB Charger and Power Booster LiPo Rider Pro Power your favourite electronic kit with green energy! The LiPo Rider Pro is a promotion of Lipo Rider.It supply heavier load output(1A peak) than Lipo Rider. The LiPo Rider Pro board allows you ride the solar wave to run your favourite 5V device. The LiPo Rider Pro board is the ideal green power solution for your outdoor sensor design.
PAGE 2
Features           Maximum 1A load output Battery and Solar panel connector is JST 2.
PAGE 3
Specification Items Min Norm Max Iin Solar 4.8V 5.0V 6.5V Icharge (RIset=3.9kΩ) 400mA 500mA 600mA Iload 0mA 1000mA Vbatt(Rx=0Ω) 4.2V Vsource USB 5.0V Vdestination USB 5.
PAGE 4
 Input voltage lower than gate voltage  The input voltage lower than battery voltage LED Battery Indicator The LiPo Rider Pro has four LED battery indicators like the cell phone,and you can see the battery power by just pressing the button K2 like below: LED battery indicator parameter Usage Example Outdoor Sensor Device Power Supply One important application of the Lipo Rider Pro board is as an affordable power supply for outdoor sensors.
PAGE 5
If a firmware reprogram for the outdoor sensor device is required, simple connect the mini USB port to your PC which will put the device under “Program Mode” as explained above. Larger/multiple batteries and/or solar panels can be used, but only with end-user modifications.