Datasheet
SH1107
46
Absolute Maximum Rating*
DC Supply Voltage (VDD) . . . . . . . . . . .... . -0.3V to +3.6V
DC Supply Voltage (VPP) . . . . . . . . . . . . . . . . -0.3V to +17V
Input Voltage . . . . . . . . . . . . . . . . . . . . -0.3V to VDD + 0.3V
Operating Ambient Temperature . . . . . . . . . -40°C to +85°C
Storage Temperature . . . . . . . . . .. . . . . . . -55°C to +125°C
*Comments
Stresses above those listed under "Absolute Maximum
Ratings" may cause permanent damage to this device.
These are stress ratings only. Functional operation of this
device under these or any other conditions above those
indicated in the operational sections of this specification is
not implied or intended. Exposure to the absolute maximum
rating conditions for extended periods may affect device
reliability.
Electrical Characteristics
DC Characteristics (VSS = 0V, VDD = 1.65 - 3.5V AVDD=2.4-3.5V, TA =+25°C, unless otherwise specified)
Symbol
Parameter Min.
Typ.
Max.
Unit
Condition
VDD Operating voltage 1.65
- 3.5
V
AVDD
DC-DC voltage 2.4
3.0 3.5
V
VPP OLED Operating voltage 7 15 16.5
V
VBREF
Internal voltage reference 1.15
1.20
1.25
V
IDD1
Dynamic current
consumption 1(in VDD)
- 110
160
µA
VDD = 3V, AVDD=3V, IREF = -15.625µA, Contrast α =
256, Bulid-in DC-DC OFF, Display ON,
display data = All ON, No panel attached.
IDD2
Dynamic current
consumption 2 (in AVDD)
- 190
285
µA
VDD=3V, AVDD=3V, IREF = -15.625µA, Contrast α = 256
,
Bulid-in DC-DC ON, VPP=15V, Display ON,
display data = All ON, No panel attached.
IPP
OLED dynamic current
consumption
- 1 1.27
mA
VDD = 3V, AVDD =3V ,VPP = 15V, IREF = -15.625µA,
Contrast α = 256, Display ON, Display data = All ON,
No
panel attached
Sleep mode current
consumption in VDD & AVDD
- 0.01
5
µA
During sleep, TA = +25°C, VDD = 3V,AVDD=3V
ISP
Sleep mode current
consumption in VPP
- 0.01
5
µA
During sleep, TA = +25°C, VPP = 15V (External )
- -500
-
µA
VDD = 3V, VPP = 15V, IREF = -15.625µA, RLOAD = 20kΩ,
Display ON. Contrast α = 256.
- -343.75 -
µA
VDD = 3V, VPP = 15V, IREF = -15.625µA, RLOAD = 20kΩ,
Display ON. Contrast α = 176.
- -187.5
-
µA
VDD = 3V, VPP = 15V, IREF = -15.625µA, RLOAD = 20kΩ,
Display ON. Contrast α = 96.
ISEG Segment output current
- -31.25
-
µA
VDD = 3V, VPP = 15V, IREF = -15.625µA, RLOAD = 20kΩ,
Display ON. Contrast α = 16
∆ISEG1
Segment output current
uniformity
- -
±3
%
∆ISEG1 = (ISEG - IMID)/IMID X 100%
IMID = (IMAX + IMIN)/2
ISEG [0:131] at contrast α = 256.
∆ISEG2
Adjacent segment output
current uniformity
- -
±2
%
∆ISEG2 = (ISEG [N] - ISEG [N+1])/(ISEG [N] + ISEG [N+1]) X 100%
ISEG [0:131] at contrast α = 256.