Datasheet

SH1107

11. Display OFF/ON: (AEH - AFH)

Alternatively turns the display on and off.

(E)

(

WR/

)

0 1 0 1 0 1 0 1 1 1 D

When D = “L”, Display OFF OLED. (POR)

When D = “H”, Display ON OLED.

When the display OFF command is executed, power saver mode will be entered.

Sleep mode:

This mode stops every operation of the OLED display system, and can reduce current consumption nearly to a static current

value if no access is made from the microprocessor. The internal status in the sleep mode is as follows:

(1) Stops the oscillator circuit and DC-DC circuit.

(2) Stops the OLED drive and outputs Hz as the segment/common driver output.

(3) Holds the display data and operation mode provided before the start of the sleep mode.

(4) The MPU can access to the built-in display RAM.

12. Set Page Address: (B0H - BFH)

Specify page address to load display RAM data to page address register. Any RAM data bit can be accessed when its page

address and column address are specified. The display remains unchanged even when the page address is changed.

(E)

(

WR/

)

0 1 0 1 0 1 1 A3

A3 A2 A1 A0 Page Address

0 0 0 0 0(POR)

0 0 0 1 1

0 0 1 0 2

. . . . .

1 1 0 1 13

1 1 1 0 14

1 1 1 1 15

Note: Don’t use any commands not mentioned above for user.