Datasheet

34.8.13 Data
Name: DATA
Offset: 0x28
Reset: 0x0000
Property: -
Bit 31 30 29 28 27 26 25 24
DATA[31:24]
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 23 22 21 20 19 18 17 16
DATA[23:16]
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8
DATA[15:8]
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
DATA[7:0]
Access
R/W R/W R/W R/W R/W R/W R/W R/W
Reset 0 0 0 0 0 0 0 0
Bits 31:0 – DATA[31:0] Data
Reading these bits will return the contents of the Receive Data register. The register should be read only
when the Receive Complete Interrupt Flag bit in the Interrupt Flag Status and Clear register
(INTFLAG.RXC) is set. The status bits in STATUS should be read before reading the DATA value in order
to get any corresponding error.
Writing these bits will write the Transmit Data register. This register should be written only when the Data
Register Empty Interrupt Flag bit in the Interrupt Flag Status and Clear register (INTFLAG.DRE) is set.
Reads and writes are 32-bit or CTLB.CHSIZE based on the CTRLC.DATA32B setting.
SAM D5x/E5x Family Data Sheet
SERCOM USART - SERCOM Synchronous and Asyn...
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 967