Datasheet

Bit 11 – ICM Interrupt Flag for ICM
This flags is set when a Peripheral Access Error occurs while accessing the peripheral associated with
the ICM, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the ICM interrupt flag.
Bit 10 – TRNG Interrupt Flag for TRNG
This flags is set when a Peripheral Access Error occurs while accessing the peripheral associated with
the TRNG, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the TRNG interrupt flag.
Bit 9 – AES Interrupt Flag for AES
This flags is set when a Peripheral Access Error occurs while accessing the peripheral associated with
the AES, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the AES interrupt flag.
Bit 7 – PDEC Interrupt Flag for PDEC
This flags is set when a Peripheral Access Error occurs while accessing the peripheral associated with
the PDEC, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the PDEC interrupt flag.
Bit 6 – TC5 Interrupt Flag for TC5
This flags is set when a Peripheral Access Error occurs while accessing the peripheral associated with
the TC5, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the TC5 interrupt flag.
Bit 5 – TC4 Interrupt Flag for TC4
This flags is set when a Peripheral Access Error occurs while accessing the peripheral associated with
the TC4, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the TC4 interrupt flag.
Bit 4 – TCC3 Interrupt Flag for TCC3
This flags is set when a Peripheral Access Error occurs while accessing the peripheral associated with
the TCC3, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the TCC3 interrupt flag.
Bit 3 – TCC2 Interrupt Flag for TCC2
This flags is set when a Peripheral Access Error occurs while accessing the peripheral associated with
the TCC2, and will generate an interrupt request if INTENCLR/SET.ERR is '1'.
Writing a '0' to this bit has no effect.
Writing a '1' to this bit will clear the TCC2 interrupt flag.
SAM D5x/E5x Family Data Sheet
PAC - Peripheral Access Controller
© 2019 Microchip Technology Inc.
Datasheet
DS60001507E-page 747